For commercial vessels over 150GRT, fishing vessels over 35m and naval vessels with or without DG correction
Suitable for use with Lilley & Gillie (and other) Transmitting Magnetic Compass (TMC) equipment to operate repeaters, off-course alarms and outputs to navigation equipment including gyro back up.
Reduced shipyard installation work
Improved watertightness around deck/periscope area
Simple periscope assembly installation and removal
Low voltage lighting within the binnacle
Mounting arrangements for various TMC sensors
Material: Reinforced glassfibre binnacle
Correction: A full set of compensating magnets for B, C and H plus adequate quadrantal corrector and flinders plates.
Periscope: Telescopic with a maximum vertical length of two metres
Fixings: Rubber base gasket and four S/S M20x90 mounting bolts, nuts and washers.
Lighting: Two 24vdc 15w lamps and one spare fitted within the binnacle. Control of lamps, dimmer and power supply by the FW9862
Control Unit. A two position dimmer switch is also fitted within the binnacle for local control
Power Supplies:The FW9862 Control Unit includes a transformer and has AC mains (110 or 220v) and 24vdc inputs with 24vdc outputs.
Both the input and output circuits are switched thereby maintaining illumination under all circumstances. A two position
dimmer switch is included on the control unit.
Compass: Lilley & Gillie ‘SR4’, Class A, 175mm Reflector Card.
Azimuth Mirror: The FW9011 Azimuth Reading Device, Group 1 Type, Azimuth Mirror/Circle, is supplied in a hardwood storage box.
Weights: Reflector Binnacle 35kg
Non-Reflector Binnacle 30kg
‘SR4’ Compass 6.5kg
Lighting Control Unit 0.62kg
FW9011 Azimuth in box 1.45kg
Colour: Binnacle, Dark Admiralty Grey. (Others available) Periscope Assembly, Black.
Lighting Control Unit, Black with white lettering.