top of page

F-3000W

Description

IMO resolution-compliant dual-frequency navigation sounder housed in electrostatic ally-shield ABS plastic cabinet.

Certified to comply with EU marine Equipment Directive (MED) and other applicable international standards for wheel mark certification

7-analog colour, easy-on-the-eye echogram across 10.4" long-life CFL backlit daylight-readable LCD screen

Fully automatic operation, tracking bottom contour with appropriate range, transmit power, receiver gain and TVG settings. Manual override is possible

Stores up to 24 hours of sounding history for off-line applications, together with date, time stamping and with position coordinates (option GPS sensor with NMEA data outputs required).

Externally acknowledgeable navigational and failure alarms by IEC-defined software commands

Password-protected to prevent unauthorised changes to important system parameter settings

Built-in AC and DC power supplies, accepting a wide range of AC or DC voltages for safe operation, eliminating the need for an AC power adapter or a DC voltage regulator.

F-3000W.jpg

Specification

Physicals

Transducer Frequencies: 50 and 200kHz (single housing); separate single frequency transducers optionally available

Screen: 10.4" CFL-backlit LCD, daylight-viewing, VGA (640x480 pixel) resolution

Depth Ranges: 5 to 1000m in 8-range steps, automatic/manual selection; fathom/braccia/foot calibrations selectable

Minimum Detectable Depth: Better than 50cm (200kHz), 1m (50kHz)

Transmit Power: Approx. 1 kW RMS with automatic selection of optimum power level and pulse length for range in use

Soundings Data Storage: Up to 24 hours in non-volatile memory; retrieval from PC/INS device via RS-422 port.

Power Requirement: 11 to 40VDC, approx. 18W or 110-220 VAC, approx. 30 VA

Cabinet Weight: Approx. 6.6kg (with mounting bracket)

Major Compliant Standards: IMO Resolutions MSC.74(69) & A. 694(17), IEC60945, IEC 61162-1, ISO 9875, MED 2011/75/EU

bottom of page