VECTOR V102™ GPS Compass Series

Description

Experience superior navigation from the accurate heading and positioning performance available with the Vector™ V102™ GPS compass. The Vector V102 uses SBAS for differential GPS positioning allowing Hemisphere GNSS to provide a highly effective heading and position based smart antenna that out rank any fluxgate compasses.

The rugged low profile enclosure combined with Hemisphere GNSS’ Crescent® Vector OEM technology gives portability and simple installation. The compass - measuring less than half-meter length - mounts easily to a flat surface or pole. The stability and maintenance-free design of the Vector V102 provides simple integration into autopilots, chart plotters, and AIS systems.

Specification

GPS Sensor 

Receiver Type:          Vector GPS L1 Compass

Signals Received:     GPS

Channels:                  Two 12-channel, parallel tracking (Two 10-channel when tracking SBAS)

GPS Sensitivity:         -142 dBm

SBAS Tracking:          2-channel, parallel tracking

Update Rate:           10 Hz standard, 20 Hz optional

Power

Input Voltage:                          6 to 36 VDC
Power Consumption:             3.0 W nominal (GPS L1)

Current Consumption:           0.25 A nominal (GPS L1)

Power Isolation:                      Isolated to enclosure
Reverse Polarity Protection: Yes

Mechanical

Dimensions:              41.7 L x 15.8 W x 6.9 H (cm)

                                    16.4 L x 6.2 W x 2.7 H (in)

Weight:                       1.5 kg (3.3 lbs.)
Power/Data Connector: 12-pin, Female, IP67

Express Marine Electronics Co. Ltd. © 2018 | All Rights Reserved

Express Marine Electronics Co. Ltd.

 

Unit 2, 23/F., Man Shing Ind. Bldg.,
307-311 Castle Peak Road,
Kwai Chung, Hong Kong

香港 葵涌 青山公路307-311號
萬勝工業大廈 23樓 2室